Epoxy polyester mixed powder coating
Font size:SMB

Typical usage:

Indoor furniture

Home appliance

Elevator

Door

Goods shelf


Product characteristics:

Suitable for indoor use

Rich colors and diverse textures

Good chemical resistance

Good mechanical properties

Not recommended for outdoor use


Color and Appearance:

Plane high gloss:70-90°

Plane dull:40-70°

Plane low gloss:5-40°

Sand texture / hammer texture / skin texture / metal effect

Color: Standard color atlas or customized



环氧-聚酯。。.png


Performance parameters:


ed14cf242d880867.jpg


Base material and pre-treatment:

Steel: Degreased, phosphated

Aluminum: Chromate-free passivated


Spray process:

Corona electrostatic spraying

Friction electrostatic spraying


Standard packaging:

25Kg carton lined with plastic bag


Curing conditions:

Suggested various curing methods: backing with oven, infrared heating, thermal convection

Limitation: By-products of baking combustion in gas stoves may cause severe changes in coating color

Workpiece temperature 180℃/15min


Storage:

Store in the ventilated place below 30 ℃ without direct sunlight, keep away from fire source, effective storage period is 12 months;

For products with gloss below 40°, the effective storage period is 6 months @ 30 °C


Safety:

Powder coating does not contain toxic substances, and no toxic gas is generated during production, storage, transportation and use. However, during use, the operator should wear dust mask, protective glasses and protective clothing to avoid inhalation or direct contact with the powder for a long time, and fire and static sparks should be prohibited during use.


Precautions:

There is a slight difference in color and effect between laboratory color matching and actual production;

Do not mix this product with other powders;

The base material must be properly cleaned and pre-treated before use;

Spray with manual or automatic electrostatic spray gun, please inform in advance if using friction gun for spraying;

The recommended coating film thickness is 60-80um, which can be adjusted appropriately according to the shape of the coated workpiece and regulations.


Updated:2019-12-05 | Return
Prev: Weather-resistant powder coating Next: No information
This article keywords: