Product characteristics:
Weather-resistant polyester resin/ TGIC polymerization
8-year weather resistant at outdoor
Excellent mechanical properties
Excellent levelling
High storage stability
Typical usage:
Outdoor furniture
Sports facilities
Outdoor appliance
Electric cabinet
Lamp post
Color and Appearance:
Plane high gloss:70-90°
Plane dull: 40-70°
Plane low gloss: 20-40°
Sand texture / hammer texture / skin texture / metal effect
Color: Standard color atlas or customized
Performance parameters:
Base material and pre-treatment:
Steel: Degreased, phosphated
Aluminum: Chromate-free passivated
Galvanized base material: Phosphated, clean
Spray process:
Corona electrostatic spraying
Friction electrostatic spraying
Standard packaging:
25Kg carton lined with plastic bag
Curing conditions:
Suggested various curing methods: backing with oven, infrared heating, thermal convection
Limitation: By-products of baking combustion in gas stoves may cause severe changes in coating color
Workpiece temperature 200 ℃/ 10-15min
Storage:
Store in the ventilated place below 30 ℃ without direct sunlight, keep away from fire source, effective storage period is 12 months;
For products with gloss below 40°, the effective storage period is 6 months @ 30 °C
Safety:
The powder coating does not contain toxic substances, and no toxic gas is emitted during production, storage, transportation and use. However, during use, the operator should wear dust mask, protective glasses and protective clothing to avoid inhalation or direct contact with the powder for a long time,and fire should be strictly prohibited during use
Precautions:
There is a slight difference in color and effect between laboratory color matching and actual production;
Do not mix this product with other powders;
The base material must be properly cleaned and pre-treated before use;
Spray with manual or automatic electrostatic spray gun, please inform in advance if using friction gun for spraying;
The recommended coating film thickness is 60-80um, which can be adjusted appropriately according to the shape of the coated workpiece and regulations.